View Single Post
  #8  
Old 02-01-2005, 09:46 PM
jstout66 jstout66 is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: Ne
Posts: 1,484
Ian, Have you also checked the flyback to make sure it is good? I would check that before doing any further work. Check the flyback and make sure there are no burn holes and also smell inside the can to make sure there is no burnt odor. I know I probably sound like a broken record on these posts, but flybacks were RCA's main weak point and usually the main cause of failure on those chassis. I'm only stating this because there isn't much point in doing all the other work if that isn't attended to first. As for the picture tube.... It probably has a 25XP22 which was a pretty durable tube. I wish you luck on the repairs, and you've got a pretty "high-end" set for it's time if you have remote!
Reply With Quote