|
Chad pretty much said it all there. Those ceramic wire wound resistors would commonly burn up/open resulting in a loss of B+. Those same resistors got hot enough to really burn up other close components expecially wires and the termial strips they were soldered on.
The stuck UHF tuner is common in almost every RCA set I came across. Problem is dried up grease in the UHF gear shaft. the steel shaft is inserted through about a 1" bushing on a pot metal bracket. the grease will dry up, turn into a gummy substance. Do not attempt to try to break it loose with pliers by turning the shaft or gear. What works best is to use a hair dryer or heat gun (yes, another heat gun trick for TV repair!) and heat the bushing. Be sure to pull the E clip off the end of the shaft so you can remove it. Once you get it hot enough, you can turn the shaft with a gentle twisting motion and pull it out of the bushing. then use a cotton swab of WD-40 or some other petroleum lubricant to break down the grease inside the bushing and on the shaft. Reassemble using any kind of oil, it will work as good as new.
Do you have a model number available? Keep an eye on ebay for remotes. Those rca 7 button ultrasonic remotes appear every so often.
__________________
I tolerate the present by living in the past...
To see drh4683's photo page, click here
To see drh4683's youtube page, click here
Last edited by drh4683; 01-31-2005 at 08:11 PM.
|