View Single Post
  #17  
Old 04-08-2009, 04:54 PM
Garrard201 Garrard201 is offline
AK Member
 
Join Date: Jul 2006
Location: Chicago!
Posts: 21
In the back are 2 screws for VHF, and a space for 2 screws for UHF. Looks like the UHF "board" was never installed, though. This makes sense, as the set was used in a Cleveland suburb, and they didn't have any commercial UHF till 1968.

Their main stations in Cleveland were 3, 8 & 5, only the latter of which is in use here in Chicago. SO, I hooked my digital converter (which only works on 3) to the VHF screws and get nothing. I know the terminals are working, because I hooked rabbit ears straight into the VHF screws and it made a huge difference.

I know the box is working because I have a small portable I plugged it into (also using RF).

I'm thinking 3, 5 & 8 may be non working on this set due to overuse when it was in Cleveland. I get no picture on channel 5 in Chicago, and Channel 3 is displaying a much coarser-looking static than 2 (which comes in great) or 4 (which has no signal in this area).

Thoughts? I wanted to hook in my digital box because I have the TV in my cubicle. And I work for a UHF station!!! AND WE HAVE 4 DIGITAL SUBCHANNELS! So I'd like to watch those. : )
Reply With Quote