View Single Post
  #42  
Old 04-07-2009, 12:57 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
That voltage sounds fine. I think you can reinstall the HOT at this time. Now, check the voltages on the STR30130.

Pin 1 is connected to ground (0 volts).
Pin 2 should have approx 136 volts
Pin 3 should have approx 155 volts. This is the raw B+ input from the big filter cap.
Pin 4 should have 130 volts. This is your output pin.
Pin 5 is not connected to anything in circuit and should read 0 volts.
Reply With Quote