|
Slight vertical jittering should be normal, unless it's to the point were the whole image is obviously shaking.
To adjust the vertical size you'll need to take the back cover off, once you have it off you should see a diagram where all the controls are located. Your going to adjust the one labeled "V. SIZE", turn that trimmer slightly clock wize. As for the weaker green gun, on the CRT neck board there is a trimmer labeled "G. BKG", your going to want to adjust that one with the set on to see your progress.
Be cautious with the back cover off since there are dangerous voltages inside the TV...
Last edited by site123a; 03-22-2009 at 02:50 PM.
|