View Single Post
  #14  
Old 03-03-2009, 01:02 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by OvenMaster View Post
I had a TV EXACTLY like that in the early '80's! A friend of mine was cleaning out his basement and just gave me a 12" and a 15". There were some vertical lines in the 12" set's pic, but the 15" was dead. I swapped out the tubes from the 15" into the 12" set and the lines moved to the left. I slapped the set about a dozen times, and the lines went away. For good!

I used that TV for the next ten, fifteen years as a bedroom set and monitor for my Texas Instruments 99/4A computer. When the picture started to have the CBS eye look like an egg, I tossed it. In retrospect, I shoulda kept it.

Very nice catch! Just do NOT use Windex on the channel knobs. The ammonia will dissolve the numbers!!

Tom
I found out about the windex on an old radio dial scale. I'm glad it wasn't one I really cared about!

When I was younger, I had a 12" Zenith that was 3 or 4 years older than this one. It had knobs on the front rather than the side and it said "all channel" on the front. All I did to it was replace the horizontal phase detector diodes. That was back when a 12" B&W was worth $25 on the used market and I let it go. Now, 19" color sets are barely worth $25; and, that's only if they are remote.
Reply With Quote