|
Here you go Eric. You're probably referring to a post I made re SlipPlate to the original AK thread entitled: "Outer coating on 10BP4 peeling." Earlier in that thread, I posted resistance measurements. BTW, your masking job looks factory to me. I do my circles with some contact paper that the 99cent store sells.
Later in the thread, I posted these capacitance figures:
My Sylvania Characteristics of Cathode Ray Tubes from 1959 shows a coating capacitance of 500 uuf min. to 2500 uuf max. for a 10BP4. It wants 750 – 3000 for a 12LP4.
I got out the old Heathkit IT-11 cap checker. I measured from the 2nd anode button to the outer coating of my freshly Slip-Plate coated neckless (thanks to UPS) 10BP4
The reading was 900 uuf.
The reading on my new RCA 12KP4 is 1100. The Sylvania reference is 500 – 2500 for the 12KP4.
How thick is the Slip-Plate coating that I sprayed on? It was enough so that I could no longer see the glass underneath.
Roger
|