View Single Post
  #6  
Old 02-13-2009, 12:33 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by bgadow View Post
I have seen some from that era that will knock your socks off. Back when I briefly tried to play tv repairman I did work (if you could call it that) for a used furniture store and he had a whole lineup of these. They were all dead and I never managed to fix either one of them.
It finally got to the point where my troubleshooting would end with basic power supply checks and a check of the start-up pulse. If this didn't do it, I junked the set. I spent too much time pulling hair out and ruining modules back when these sets were actually worth something. I never did like that chassis and neither did any other TV man in the area. I remember one that would half-way power up. I pulled my hair out finding the problem. Turned out to be a shorted lytic cap inside of the digital tuner. I think it was a 2200uf , 35V cap. If someone has a good troubleshooting procedure for this chassis, please post it so we can all see. I might feel better about these sets if I acutally knew a way to troubleshoot them without losing my religion.

Really, the type of picture on these sets will depend on the CRT. The early versions had a tri-pot tube like what the original system 3 used. Those produced a sharp picture when working right. The picture was not near as good, IMHO, when they went to the more current style inline CRT.
Reply With Quote