View Single Post
  #12  
Old 12-29-2004, 08:48 PM
wa2ise's Avatar
wa2ise wa2ise is offline
VideoKarma Member
 
Join Date: Dec 2002
Location: USA
Posts: 3,147
It sounds like the amount of magnetic field the kid applied will need external degaussing to remove. The soldering gun trick should help. Or a tape eraser. Maybe the thermister that the internal degausser uses went bad. It's a variable resistance that has low resistance when cold, and high resistance when hot. It's usually in series with the degaussing coil across the powerline on the load side of the power switch. The thermistor heats up to hot in a second or two. You might be able to salvage one from an old computer monitor. It looks a little like a disc ceramic.
Reply With Quote