|
Those voltages are all way high. It's late I will have to think about that one. I never ran one with no yoke and the HO tube out. Well I did run one once with out the yoke, but it burnt out a diode in the yoke circuit because there was no load. That was not a 31 though. I have a test jig to connect the chassis to, so it has the proper loads on the Horiz and vert. sections. The collector is connected to the grid of the blanking amp and to the grid of the horiz out tube through r143. It's late but it looks like you would have to have multiple componant failures to have the collector and base voltage so close. Like I said I will have to think about it some more. It will probably be something simple we are all overlooking. That's how my luck has been lately.
|