View Single Post
  #4  
Old 12-14-2004, 03:30 PM
bgadow's Avatar
bgadow bgadow is offline
VideoKarma Member
 
Join Date: Oct 2003
Location: Federalsburg, MD
Posts: 5,865
FYI, the arcing occurs the instant power is turned on. Odd, I have a switched socket with (plugs into the wall, tv plugs into it, cord about 6' with a switch on the end) so I used that so I could kneel down & be looking straight at it when I flipped the switch. With cord switch off, I turned on the tv switch, it started arcing! But no AC? Or miswired cord? Light bulb plugged in same way didn't light! I want to ignore that odd problem for now! I'll rig up another such way to flip it on while I'm kneeling. It will scare the devil out of me when I turn it on, even though I know what is going to happen, but gotta do it! I don't see any signs of the arcing, though-no carbon or burnt spots. It will be a night or two before I can work on it again, think I'll try cleaning the traces good both top & bottom. There are spark gaps connected between the screen control shell & chassis ground, I suppose so that in the event of a short that shell doesn't go live with 800-1000 volts. I'll also see if I can get a look into the HV cage while this is going down.
__________________
Bryan
Reply With Quote