View Single Post
  #9  
Old 12-31-2008, 12:14 AM
cooljjay's Avatar
cooljjay cooljjay is offline
VK Member
 
Join Date: Feb 2008
Location: vallejo, ca
Posts: 54
Make sure no one soldered the 2 pins together on the tube, also check for solder drops, they can sometimes get lodged between the pins or a cap/resistor and chassis. You may already know but if not, make sure to disconnect the old can cap and check the pos/neg of the ecaps to make sure they are correctly installed.
__________________
Jason-
Reply With Quote