
12-30-2008, 02:12 PM
|
 |
Eagle Keeper
|
|
Join Date: May 2006
Location: Central Iowa ,Northern end of"tornado alley"
Posts: 70
|
|
Quote:
Originally Posted by Reece
Agree with all above suggestions to check. Either the cap, the tube, or the tube socket is at fault. Sometimes there may be internal charring between layers of a tube socket that short out a terminal. Pull the tube and check with your ohmmeter to see if pin 6 is shorted to any other pin: should not be. If cap is OK, unsolder the wire(s) from pin 6 and check ohms between that and all other pins and to ground. Should have infinite ohms.
Reece
|
Sage advice...
__________________
RET USAF 1978-1998
|