View Single Post
  #6  
Old 12-21-2008, 03:10 PM
Stone3035 Stone3035 is offline
AK Member
 
Join Date: Dec 2008
Location: Ontario, Canada
Posts: 25
My voltages to the micro and eeprom are all good. The set came to me in this condition. The owner of the said said that his 3 yr old daughter decided to keep pushing the power button on the front causing it to be in this state. I did change the micro but, just after I did I slipped with my meter leads and unfortunaletly caused a problem with the power switching regulator that caused the set to turn of and on by itself constantly until unplugged. I then made another error slipping with the meter leads blowing up the switching regulator. I replaced the regulator, and an open 1 ohm resistor in the secondary power section. After that it was back to square 1. So I'm thinking, I could have repaired it, but because of my slippery leads killed the new micro..?? I'm gonna try another one. Wish me luck....
Reply With Quote