View Single Post
  #6  
Old 12-17-2008, 07:58 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
I can't recall if that model has discrete transistor outputs or a chip. If it's the transistor version, it uses complementary 2SA1013 and 2SC2383 transistors. One will blow, and eat a low-ohm resistor (2.7 or 3.3 ohms, IIRC). If it's the chip version, it usually has an STK563 hybrid module. If it's the STK version, look for bad solder all around the chip. Sometimes it's just the solder, other times it's both the STK and the bad solder joints.

Either way, good luck - nice sets!

Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote