Thread: Resistor Watts?
View Single Post
  #1  
Old 12-13-2008, 01:27 PM
fltyrap's Avatar
fltyrap fltyrap is offline
AK Member
 
Join Date: Nov 2007
Location: Washington, DC
Posts: 13
Resistor Watts?

Hi Everyone,

So I replaced a selenium rectifier with a diode and dropping resistor on a Zenith C845 (thanks everyone for your help with that), and I flipped the thing on.

Everything was fine, until after about three seconds I noticed smoke from the chassis. Inspection revealed the smoke was coming from a resistor-- a 680 ohm resistor. I guess that sucker is fried.

My question is, how do I determine the watt rating that I need to replace it with? The schematic just says, "680". The resistor leads into a 6BJ6 R.F. tube, and says "98v" at the input.

I suspect I should be able to figure this out from the schematic, but I'm not very good at reading these things.
Reply With Quote