|
You could use a prism block from a scrapped LCD projector (i might have one actually). but the viewfinders will need matched. as obviously you can have slight errors in the geometry of one of the CRTs, can throw your alignment off on that CRTs color. so you gotta have width/linerity/hight controls for each individual CRT to do this the easy way.
then you still have your pincussion and keystoning issues that you wont be able to overcome unless you modified the circuitry for it. i dont know exactly how yet...
Also you need to modifiy the circuit a little bit to try and see if you can kick it up about 1kv. this will help tremendously for brightness. you cant go much higher than this unless you change flybacks. and even then youll have a problem with arcing/cracking the CRT and xray.
but modifiying the HVreg circuit you could get maybe an extra 500 to 1kv.
|