View Single Post
  #7  
Old 12-07-2008, 10:48 PM
mbates14 mbates14 is offline
VideoKarma Member
 
Join Date: Apr 2004
Posts: 1,016
Ive done this before. using old viewfinders and with the same lenses made a mini-CRT projector.

it will work ok, if you use a NTSC Decoder circuit. youll get a R, G, B, and H/V sync. that you can mix together and get the composite sync needed to drive the CRT view finders. BUT on some cases you may need those H/V sync lines depending on the viewfinder. Cliff Benham will be able to clue you in on where to get an NTSC decoder module. (as you need this to make a homebrew color-wheel system).

your next problem is convergence. youll never have convergence unless you design your own circuit. In my case, i used a rather large analog convergence board, and took the H/V sync gate pulses into the board, and outputted this into makeshift coils wrapped around the current yokes.

it worked ok, but you could never get it perfect. (obviously).
Reply With Quote