View Single Post
  #26  
Old 12-07-2008, 05:06 PM
jeyurkon's Avatar
jeyurkon jeyurkon is offline
VideoKarma Member
 
Join Date: Oct 2008
Location: Central Michigan
Posts: 1,699
This might be straying a little off topic but while looking at a schematic for a 1949 Television there is a four pin plug to connect the speaker. Two of the wires go to the speaker mounted transformer and connect to the B+ and plate in the set as you would expect.

The other two pins just have a jumper across them. When you pull the plug it disconnects the screen bias.

Is this to protect the output tube?

John
Reply With Quote