Just another thought: don't know what type of speaker you intend on putting in here, almost sounds like a modern day hi-fi speaker of some type. Go ahead and hook it up temporarily before you install it permanently and see if the amplifer can handle it and give you enough volume without distortion. The reason I say this is that some modern speakers with high compliance cones take relatively more power to operate and work best in a tuned or infinite sealed enclosure. Your radio might be "sweating" to operate that speaker. "Normal" replacement speakers are what this radio would have been designed to work with. You used to be able to get them at Radio Shack but I don't think so any more. My best bet lately for replacement PM speakers for radios has been to cannibalize radios, stereos and TV's from the 60's, 70's and 80's, stuff that you see people set out at the curb for the trash or that you can get at a yard sale for a couple of bucks. These are speakers made to operate in open back cabinets like your radio. You have to look harder to find such speakers new. I did find some 8" speakers cheap at the following website, don't know anything about this company, but the $5 and $6 speakers look like they would be OK if yours isn't satisfactory.
http://www.kcnproducts.com/SearchResults.asp
Reece