Thread: Zenith Projector 1985
View Single Post
  #93  
Old 11-06-2008, 01:06 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
  
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Just disconnect the CRT board and connect an 8 volt source to the filament pins. Leave the set off and let it cook for 30 minutes or so. Then, remove the 8 V source, reconnect the CRT board, and see if the green tube is brighter.
Reply With Quote