|
The video output board is an NOS OEM replacement less than 3 months old. I checked the resistor pack and all the connections look good. I found my SM and readjusted the G2, brightness range, brightness limiter and color threshold. We'll see if it helps.
As for the modules and their connections... The video output is mounted to the tube neck, so there are no solder connections. As for the other modules, they also have no solder connections. They snap into place over metal connection posts. If I release the four plastic holders around any board, they simply pull out. Maybe I should remove each board and use Deoxit on the connection points.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|