Quote:
Originally Posted by JesusJones
My input image had a bit of audio in it......don't ask how but that was the problem.
And yea I'm done with it for now. My ESR meter should arrive Monday or Tuesday hopefully and we'll continue on from there.
Would it be typical for a dud tube to show very faint picture. But nowhere near viewing brightness
Thanks for the help so far
Rudy
|
Yes, it's possible for a bad CRT to show a dim, dull picture. CRT's usually die a slow death. The picture will generally get dimmer and dimmer and fuzzier and fuzzier until there's next to nothing left.
If you are going to work on TV's, it will pay you to obtain a decent CRT tester / rejuvenator. Something like a B&K 467 or higher model number should suit your needs. They cost several hundred $ new; but, can often be purchased for a little of nothing now since the CRT is not quite as popular as it once was. There are many test sockets available for these B&K testers that will allow them to test most CRT's. You can also rejuvenate weak CRT's with these testers. Rejuvenation is not a permanent repair; but, it will buy you some time and let you see the condition of the rest of the chassis. I've had rejuvenated tubes die in minutes and I've had others that were still going a year later. Try to stay away from the '70's and older testers. The rejuvenate functions on these older models often does more harm than good and sockets are not easily available for the later tubes.