View Single Post
  #7  
Old 10-15-2008, 06:36 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
If your GE uses the "BC" chassis, I'm not at all surprised by what happened. The "BC" was not a true GE chassis; rather, a Matsushita chassis made for GE. Almost every one of these that I've seen had a burnt up flyback. I even had one burn up in my shop and the results were similar to what you described. It was working one minute and then "pop, smoke, and major stink" the next. When the flyback went, it shorted the HOT, which opened the B+ fuse.

The closest I ever came to a real TV fire was when an old RCA CTC38 flared up. The circuit breaker was defective. I figured that's all that was wrong, and me being young and stupid at the time, jumpered it with a clip lead. I turned the set on and a blaze came from the area of the PC board where the power supply diodes were. The fire went out a few seconds after I killed the power. I learned not to jump a fuse or circuit breaker and to always inspect the chassis for anything out of the ordinary before applying power.

Just to be safe, I never sleep or leave the room for extended periods with the TV on.
Reply With Quote