View Single Post
  #37  
Old 10-15-2008, 11:58 AM
kbmuri's Avatar
kbmuri kbmuri is offline
VideoKarma Member
 
Join Date: May 2006
Location: Fort Wayne, IN
Posts: 590
Rule of thumb:

If the electrolytic cap cans are covered in cardboard, they're very probably not at chassis ground. If they're bare metal, they probably are at chassis ground. Obvious reason, risk of shock touching the "hot"-neg cans if not insulated with cardboard.

Maybe not universal, but true in every case I've run across.

Adam's photo in post#1 shows bare metal cans. So reasonably assume their B- is at chassis ground.
__________________

Do not attempt to adjust your set.
Reply With Quote