View Single Post
  #2  
Old 10-13-2008, 07:38 PM
freakaftr8's Avatar
freakaftr8 freakaftr8 is offline
Convergence freak!
 
Join Date: Sep 2007
Location: Folsom, CA (no not in the prison)
Posts: 1,778
Are you testing that resistor with a leg pulled from the board?
I second that g2 control, seen it too, and especially since it's accessable from the back of the set, someone could have cranked it up. Sometimes it doesn't take much to run the PS into shutdown.

Quote:
Originally Posted by MRX37 View Post
The VG2 control can be adjusted without having to take the case off. I doubt that's the issue.

On a hunch from a post on another forum, I started looking at the resistors on the CRT neck board. I found a 25-26 ohm resistor that reads only 1 to 4 ohms. When I can, I'll replace it and see what that accomplishes.
__________________
Honey, turn on the tv.. I'm cold!
Reply With Quote