View Single Post
  #13  
Old 10-10-2008, 03:52 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,857
Okay, I'm replying again. I have some abbreviated service notes for the CTC47 chassis - these might help in the future.

Stuff to look out for, not germane to your problem:

-Piecrust or "geartooth" effect in raster - R423, a 1K resistor on PW400 could be open.
- Distorted Video could be C354 changing value. It's a 20uF 15V electrolytic, RCA part number 121995, although any generic 20 or 22uF cap will suffice.
-Hum bars in the picture could be R106, a 47 ohm resistor in the degaussing circuit opening. RCA part number 132951 is the replacement.

As to your existing problem, I'll dig and see if I go back that far in my RCA service literature. More to come.

Cheers,
__________________
Brian
USN RET 22YRS (Avionics/Cal)
CET-Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote