|
That set shouldn't be too fussy about capacitors. Just use Orange Drops or something of the sort--doesn't necessarily have to be polyprop. After all consider what the set had to work with originally. Just get some nonpolarised conventional cylindrical or dipped radial caps, and stick 'em in and be done with it is what I'd do.
You will likely need to replace all the caps eventually. Your pictures show that the vertical size and linearity controls are still not adjusted properly. If the potentiometers used for these adjustments are in good shape, and the associated capacitors are replaced, and all other fixed resistors check out OK, then you should be able to twiddle the two adjustments to get a good linearity. Bear in mind that both controls affect both size of sweep and linearity of sweep. IIRC the "size" control when decreased will shrink the bottom of the picture, and the "linearity" control will affect the top of the picture. But both controls interact, and you need to go back and forth between the two in order to get a good circle shape on the screen from a std test pattern.
|