|
As far as caps go in these, I've only had a problem with a few. One being the .1@1000vdc right next to the HOT. There is also another one right next to the hight control right at the edge of the board that goes bad, it is a .047@400vdc. There is one more that I replace for safety, one of the "white time bomb" porcelain caps in the power supply, a .039@150vac {I use a .039@600vdc instead}. My sets have the 10HD and the 10HE chassis, if you don't find these caps in yours then overlook this post, these are just the troublemakers that I have found.
__________________
My TV page and YouTube channel
Kyocera R-661, Yamaha RX-V2200
National Panasonic SA-5800
Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20
Pioneer SX-939, ER-420, SM-B201
Motorola SK77W-2Z tube console
McIntosh MC2205, C26
|