Thread: Testing tubes
View Single Post
  #8  
Old 09-30-2008, 01:50 AM
Philcofan42's Avatar
Philcofan42 Philcofan42 is offline
AK Member
 
Join Date: Aug 2008
Location: In the past
Posts: 28
Quote:
Originally Posted by leadlike View Post
I agree with the folks above-I don't pull out the tester unless I am at a loss to what problem a radio could have. I would try applying signal to a few areas to see what stage is giving the trouble. If you find you need some help, give us the model number and we'll be happy to help you.
I'm pretty new at this and am trying to learn as I go. I have done one successfull repair to a Philco console. The current project is 1940 Silvertone R1171-D that I am mostly doing for the experience since it's in pretty bad shape. I'll have to go after the resistors now since I didn't realize they tend to go bad too. I did replace most of them in my Philco, but wasn't going to bother with the Silvertone. Before I replaced the caps, the Silvertone was making that constant hum unaffected by the volume control. Now it makes a sort of fast oscillating noise that does change with the volume. Oh, and I noticed that one of the IF tubes has something rattling around inside it so I'm pretty sure that one is bad.

Thanks for the help!
Dan
Reply With Quote