View Single Post
  #12  
Old 09-27-2008, 07:08 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by Kiwick View Post
modern CRTs (starting in 1964 but mostly 70s onward) with tensioned rimbands are usually quite safe, you can throw a rock at them or hit them with a hammer and they would just fracture and slowly lose their vacuum without imploding

the only way to implode them is to smash them face-down on the floor, but even then most of the glass remains within a few feet.

Of course, a CRT with a missing or weakened rimband (rusted away...) is a real time bomb!

Older unprotected CRTs, the ones with separate safety glasses or bonded lenses are a lot weaker and far more likely to implode when disturbed, and they usually throw larger shards at higher speeds...
I saw a mid '80's GE 25" console that someone's kid shot the screen with a BB gun and all it did was leave a hole in the screen. I saw another early '70's Zenith 4-tube hybrid 25" console where someone (that I knew) got mad and hit the screen with a baseball bat. It cracked the tube but it did not implode. I've heard that a CRT is not likely to implode if you knock it's neck off or break off the tip on the end of the neck. OTOH, I've created quite a few productions when I'd throw older B&W tubes without implosion protection in the dump. A TV repairman friend of mine told me that he would shoot all of the dud tubes when he hauled them off just to make sure someone didn't get hurt in the event one of them imploded. That was back in the '60's and early '70's, before we had all the "illegal dumping" laws that we have now.
Reply With Quote