View Single Post
  #34  
Old 09-25-2008, 07:53 PM
julianburke julianburke is offline
VideoKarma Member
 
Join Date: May 2004
Location: Knoxville, Tennessee
Posts: 649
Two things here, the tube itself was not banded and it had a scratch in it somewhere. The faceplate has to be heated uniformly and completely-not spotty with a heatgun. You got one area too hot and it couldn't expand uniformly. Also, NEVER EVER EVER remove a pressure band from a live tube either or the same result will happen.

We used a infrared heater that covered the entire faceplate. The tube should be a little warmer than room temperature to start with.
__________________
julian
Reply With Quote