Thread: Daily watchers
View Single Post
  #26  
Old 09-23-2008, 10:57 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by freakaftr8 View Post
I have seen a heck of alot of these newer RCA/GE sets with that same problem. My uncle had one about 10 yrs ago and he installed a sat dish and the coax connector hust snapped off the board when he screwed back in the coax cable! I also had seen 2 Sharp sets from the late 90's do the same.
It's not just the RCA's. It's all of them! On most newer sets, the coax connector is "made" onto the tuner. They are just crimped into place, and, not very good at that. They are very easy to rip off. Just the other day, I was given a 19" Duracrap (oops, I meant Durabrand) set that was found in the trash with a busted off RF connector. In some cases, I am able to reattach the connector to the tuner (I always solder, rather than crimp, the connector to the tuner housing). This was not the case here. The tuner was pretty much destroyed when the connector got yanked out. I just pulled a tuner from a junk board and that was that. My friend at the TV shop makes a good bit of $ by replacing busted off RF connectors.
Reply With Quote