|
Wow! That brings back a lot of memories, That's a 70 model should have a T940 chassis. I delivered and serviced hundreds of those sets in the 70's while I was the outside tech for a Magnavox dealer. There were quite a few improvements to that set compared to the previous chassis version the T933.
I remember replacing a lot of 6GH8's and a few HV rectifier socket cups because of arc through, the fix was a new cup and a sheet of thick plastic insulation behind it. The filament winding for the 3CU3 would sometimes arc through to the flyback core, easy fix just pull out the old winding and replace it, can easily be done without removing the chassis from the cabinet.
__________________
"proximo satis pro administratio"
KAØSCR
|