|
Humidity affects the HV supply a lot of times, and this hissing is often noted.
One of my GE portables had this problem, so I waited a few hours til the HV drained and removed the anode cap and cleaned it like the other poster said. I used an old toothbrush and some high-grade rubbing alcohol. Don't overdo it though.... Also clean the glass around the cap, that provides a ground connection on the exterior of the crt.
If this doesn't do it, check to make sure the transformer isn't visibly arcing around its casing...and if it's got a horizontal output tube, pull it and clean the pins.
Be careful in there, and good luck!
|