View Single Post
  #43  
Old 09-11-2008, 05:34 PM
ALTEC9846-8A's Avatar
ALTEC9846-8A ALTEC9846-8A is offline
VideoKarma Member
 
Join Date: Dec 2007
Location: victoria b.c. canada
Posts: 24
Quote:
Originally Posted by JesusJones View Post
"Be careful as some chassis were conected directly to one side of the a/c line so depending on which way the plug is in the wall the chassis may be live or not."

HAHa I learnt this the hard way already. Testing to see if caps are hot Zaap. I was so happy, I thought I got the HV working again. But after some thought I realized it was 60hz because thats just how it felt. Bugger I said( I also didn't think it could with just one hand in there...maybe 2 fingers touched)

So replacing the larger caps could give me a boost from 30v up to my proper voltage?
And just some test results from the caps. I got the charge to go up to 40v. They seem to be fixing themselves a little every time I power it on(30 to 40) But I don't think they will fully recover. Also I measured 60 volts ac With my tester at the same points. And it jumped around a little (40-90 vac).
With this in mind could it be the caps. I wanna say yes. But if anyone thinks its a little far fetched for the caps to bring the voltage from 30 to the proper 250 or w/e it should be. please say so.

Rudy
There goes one of your 9 lives as a repair technician
__________________
ALTEC 9846-8A Studio Monitors YAQIN 100B TUBE AMP Sony TA2000F preamplifier
Reply With Quote