|
I can't remember which type of IF circuit your has, but what happens is that the tiny IF and AFC coils get cold solder joints. If yours has an IF Pack, it's a 1 1/2" square, by 3/4" thick, metal can, sitting upright with one row of pins and 4 can ground points soldered through the main board. Remove it, remove the board from the can, and solder every connection in the can. If yours doesn't have the pack, it has a larger shield can which will have a top on the component side, and a soldered-on bottom under the board. Same cold solder joints, just in a different layout. That can will also be near the tuner.
Charles
__________________
Collecting & restoring TVs in Los Angeles since age 10
|