|
if this is a delta gun-then,yes,the rings are for purity. 2 rings nearest the yoke will be for best red purity.adjustment will move the picture off center.the other set will be your blue lateral (horizontal).use red screen(turn blue and green controls off) and move the first rings for best purity. if red screen is not attained,then you have to degauss or reposition yoke. adjust screen to white line in service position.then use the 3 controls on the neck of crt to converge center. this should give you good purity and center. adjust smaller controls as needed and they are marked as to what they control.i worked as a young man in a repair shop and my main job was to repair tuners and set up convergence.i have worked on that colortrak series before.i owned more than a few of those great sets.use procedure as i posted before.sometimes those old pots get screwy with age and those will really throw your alignment off.the procedure to set up a delta gun didn t changed much in the 25-35 years in production.crt number is a delta gun 25 inch full viewing.should be a great performer for you.
|