Quote:
Originally Posted by radiotvnut
I was recently asked to fix a later model 36" Panasonic CRT flat screen. All that was wrong was the AC fuse and the chassis appeared to be much better quality than the '80's and '90's Panasonics. The ones from the '80's and '90's usually had bad flybacks, a ton of bad solder connections, and weak CRT's (mainly on the 19" and larger sets). Panasonic made a chassis for GE that was to be used in 25" sets from the mid '80's. It's the one that used the TLF14423F flyback (I know some of you old TV men know what chassis I'm talking about). Every one of those I ever got had a bad flyback, weak CRT, loose connections, or a combination of the three. I finally got to the point that I would not go any further if I discovered that chassis in a set.
|
Were all the Panasonic/Quasar sets from the 80s and 90s you serviced were assembled in Canada or Mexico? Maybe that's why the solder connections were poor. I have a Made in Japan 1985 Panasonic CT-130V TV/VCR combo, and the TV solder connections look very solid, tight, and beautiful to me. This one was the first 13" TV/VCR combo ever made in history and weighs a ton. Do you think a Made in Japan Panasonic/Quasar set used a better flyback?