View Single Post
  #51  
Old 08-24-2008, 10:58 PM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Look for any small electrolytic caps in the horizontal drive circuit. Also, trace that B+ input pin of the flyback back to the power supply and I'm sure you'll find at least a 47 uf, 160V cap in the circuit. Pull that cap and check it. I had a sharp come my way with a shorted HOT. I replaced the HOT and the set still had some picture pulling and shifting. It turned out to be a defective electrolytic cap in the B+ line.
Reply With Quote