|
195 F is MUCH too hot for a transistor. Anything above about 70 C would make me worried. That 150 C rating is probably the junction temperature which will be a lot hotter than the heat sink, or case. It's also probably the absolute maximum rating, not the idea rating.
You either have a problem in the HOT collector circuit, or a problem with the drive to the base. A HOT needs to be turned on and off quickly and fully by the base signal. If it's not, it will over heat and fail quickly. The fact that the sides were pulling in is a definite problem. I'm not familiar with this set, so I can't really give you much advice there.
|