|
I would say that you have more bad caps then. Check all the boards over very carefully for signs of leaking caps. The last time I worked on one of these was at least 5 or 6 years ago, and the caps were a problem then. It is worth the effort. This chassis was one of Zenith's best from the 80's, and their last good one.
One neat thing is that the A/V half of the chassis is interchangeable with other A/V boards from this chassis line. That means you can replace a mono board in a low end 19" set with one from a high end 27" that has S-video, picture in picture, and other features never found on a 19". I used to have a 20" that I did this to so I could have S-video.
As far as the remote goes, either your universal has a problem, or the TV is set to respond to different remote codes than a Zenith branded set. Look for something in the service menu like "zenith / PL". Change it to Zenith if you want it to respond to a Zenith remote.
|