View Single Post
  #9  
Old 08-21-2008, 01:06 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Get a can of freeze spray and hit each part until a difference is noted and replace the part in question. You could have an out of spec resistor or a resistor that is changing value as it heats up.

Also, change the vertical oscillator and output tubes. It's usually not the tubes that cause vertical problems; but, it's worth a try.
Reply With Quote