View Single Post
  #1  
Old 07-24-2008, 06:02 PM
jstout66 jstout66 is offline
VideoKarma Member
 
Join Date: Aug 2003
Location: Ne
Posts: 1,484
Zenith "Panarama" System 3 Help

I finally found a Zenith "Panarama" set. It's a System 3 from March 1979. Model K2540X.
It had a good picture, but the pix would turn green once in awhile, but if you smacked the set would go back to normal. I took the back off to test the picture tube (25VETP22) which tested fine. I figured loose connection so I just made sure everything was connected firmly. Powered the set up, and now I have no vertical, just a thin line in the center of the screen like it was in "service mode" Anyone have any ideas?
The modules in the set (which I could barely make out) are 9-155 (video board that plugs into pix tube. 9-152-02 (not sure what that one does) 9-151-01 (tuner) and 9-153 (high voltage board)
Does anyone still have any of those modules laying around. Thanks!
Attached Images
File Type: jpg S6300452.jpg (26.4 KB, 36 views)
Reply With Quote