View Single Post
  #8  
Old 07-20-2008, 08:43 AM
roundscreen roundscreen is offline
VideoKarma Member
 
Join Date: Oct 2003
Location: buffalo ny
Posts: 377
Hi
I am just going to throw some ideas at you in hopes it might help when you take your set to the man to get repaired.
The coil you are having problems with, Check and see if one of the thin wires running from the body of the coil to the base where it is mounted to the board is broken. I have run into that many times. Heat can cause it to expand and the wire breaks. Look for a bad pot on the convergence board. It can fool you into thinking a coil is bad but the pot may be open and the convergence will not respond no matter what you do. Look for bad connections, {RCA is good for that.} It is a pita, But just re solder all the connections on the convergence board. Check the convergence coils on the picture tube. Make sure none of them are open. Double check the diodes like what was mentioned in this thread.
If you have the chassis out of the set you might as well check all the connections on the other boards in the chassis too. look for heat stress, cracks and broken grounds.
Good luck with your set, The cabinet is really cool
Ed
Reply With Quote