View Single Post
  #4  
Old 07-11-2008, 12:42 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Quote:
Originally Posted by bgadow View Post
It is a sad state of affairs-I have tried to get into fixing newer sets but as soon as I crack open the back all the excitement goes away. Right now I have somebody wanting me to take a rather large screen Toshiba CRT set with no vertical drive. I'm tempted, sounds like an easy fix, but having to wrestle that monster out of her house and into mine-then trying to find someone to take it-I don't have time for all that right now.
That Toshiba may have a bad vertical output IC and bad caps around the IC. Some of the older Toshiba's had a couple of low value red or brown caps that would fail. There may also be an open resistor in the B+ line to the vertical IC.

I worked on the CTC197 and wound up "losing it". I know it was childish; but, I finally said "enough is enough" and slung the chassis across the back yard and then I stomped on it. I did feel better, though! My neighbor was willing to help me haul off some junk and we got rid of a bunch of stubborn BPC TV's. I really hate working on those 36" TV's because they are so dang big and heavy and it's hard for me to get one on the bench by myself. In the case of the CTC197 that I trashed, it was: pull chassis, hunt and peck, reinstall chassis, blow up parts, remove chassis, hunt and peck some more, reinstall chassis, repeat above procedure a few more times, then "lose it". I guess it's just as well that it worked out this way. Those are the kind of sets that will usually turn around and bite you in the butt after you sell it to someone.

The ONLY reason I'll will work on a modern TV is because the little bit of money they sometimes bring can go towards my vintage electronics hobby or some emergency.

I will say that used CRT sets appear to be selling better now than they did a year or so ago. Around here, people are finding out that they can't go to Wal-Mart and buy a $79.99 19" TV anymore. What few CRT sets they have are over $100 because of the built in digital tuner. A larger CRT set will be over $200. After those, you start getting into the several hundred $ and up LCD's, Plasma's, etc. There are still many people that don't have big $ for an LCD; but, can come up with $100 for a quality used 27" CRT set.
Reply With Quote