View Single Post
  #9  
Old 06-19-2008, 08:37 PM
zenith2134's Avatar
zenith2134 zenith2134 is offline
VideoKarma Member
 
Join Date: Feb 2005
Location: UTC -4
Posts: 2,546
If the flyback pins show no voltage, the horizontal probably isn't running. Is that a burn on the fly's side or is it just the sticker? On such a small pcb/simple design I'd just start pulling components and testing at that level, until you find the culprit. If you could ring the fly or scope the horizontal section somehow that would tell us alot. Maybe the horiz out is toast?

Much credit given in getting this set going, I admire that you take the tv hobby to the next level by working on these little buggers!! Good luck
Reply With Quote