View Single Post
  #10  
Old 06-16-2008, 08:20 AM
JB5pro JB5pro is offline
VideoKarma Member
 
Join Date: May 2008
Posts: 616
That set is as good as it gets!

I used that 3M tape also. I put one layer around the outermost edge of the tube and one layer on the outermost edge of the safetyglass to keep it from showing in the frame. The edge of one layer hit an angle surface of the other layer to give an expected proper distance between the glass and tube face.
The process you did is how anything I do goes.
Nice to know you did the right thing to make it exactly original.
That must be one of the greatest roundies on the planet!
Reply With Quote
Audiokarma