The chassis
finally arrived today. I paid by Paypal on May 19th. It's June 13th. Oh, well. Good news is it arrived without damage. I tested the 12LP4 and it's at 9.7 mA emission (8mA is good, 10mA is new). Life test is 12 seconds, 10 seconds being good and 15 seconds being new. So it ought to have a bright picture. Ad says "it does work", but I'm not ready to plug it in just yet. The power-supply/audio chassis has 2 "squirrely" 5U4s that eventually settle down as "good" but I should probably replace them. This one has a push-pull 6K6 audio out (the Roundie from Hell was a single-ended 6V6). According to Sams, this means it came from a combo-radio-phonograph unit, not just a TV set. Both 6K6's are in the "?" zone and need replaced. The 1st-stage AF amp has a 6SC7 with total grid leakage (it's toast), and I'm not sure but I think a 6SQ7 belongs there. The chassis number is printed in black ink but it's just one big unreadable smudge. It sure looks like the 20B1 I struggled with a year ago, but might be one-off from it. The smudge looks more like "20C1-3". I'll have to research. Will test the tubes on the main chassis this weekend & maybe consider a slow-powerup.
About 1/3 of the tubes (including the CRT) have stickers on them reading:
Quote:
A.D. Radio Shop
2530 W. Colorado Avenue
Colorado Springs, Colorado
|
Anybody know if it's still around? Looks like they did a major overhaul at some point in the past (there are also lots of "notes" in pencil on the chassis undersides). Maybe that's why it still "works". No orange drops though, still looks like original caps all around...
Will post more as things progress...