View Single Post
  #6  
Old 06-12-2008, 08:50 PM
Geoff Bourquin Geoff Bourquin is offline
VideoKarma Member
 
Join Date: Nov 2005
Location: Northwest Washington State
Posts: 365
I just checked the manual.....

WS-55809 is a CRT projection, not a DLP. The most common thing I find on these is bad convergence ICs. On this one they're STK392-570. If one of those died it may have blown one of those little pico fuses in the power supply. The micro tries to fire things up, sees a voltage is missing and shuts down. If you press input and menu on the front of the TV and hold both of them down for 5 seconds the LED willl blink a 2 digit code to you. That may tell what is shutting it down.

1 2 -----No error detected
2 1 -----XRP circuit triggered
2 2 -----Short circuit detected
2 3 -----Horizontal deflection failure detected
2 4 -----Vertical deflection failure detected

To be honest, I don't find the blink codes very helpful
Hope this helps.

Geoff
Reply With Quote